Installation
Figure 3-5 IP-AK2 Panel Cabinet - Back View
251.75mm [9.911”]
144.92mm [5.706”]
290mm [11.417”]
38.25mm [1.506”]
275mm [10.827”]
15mm [0.591”]
0mm [0.000”]
18mm [0.709”]
20mm [0.787”]
φ10mm [φ0.394”] Diameter (2 holes)
119mm [4.685”]
φ40mm [φ1.575”] Diameter Knockout
221mm [8.701”]
240mm [9.449”]
248mm [9.764”]
284mm [11.181”]
240mm [9.449”]
260mm [10.236”]
262mm [10.315”]
324.5mm [12.776”]
2-N3
325mm [12.795”]
235.06mm [9.254”]
140mm [5.512”]
160mm [6.299”]
200mm [7.874”]
97.1mm [3.823”]
15mm [0.591”]
76mm [2.992”]
28mm [1.102”]
48mm [1.890”]
Wirings
This section describes how to wire the IP-AK2 panel cabinet, the reader, the supervised
input and output.
Cabinet Wiring
The picture below shows how to connect the IP-AK2 panel and the inputs, outputs,
power supply in cabinet.
8
To Next Page
Loading...
