Honeywell
Monitor
The following IP-AK2 panel status can be monitored:
• Alarms – one type of event, which has been assigned with alarm status. These
often include events such as an invalid card read or a forced door.
• Events – the recorded transactions of the IP-AK2 system. For example, an event
card found, number of users logged in.
• Doors – an overview of all doors’ status in the system in graphical manner.
• Inputs – terminals located on the IP-AK2 panel; the inputs are wired to input points,
such as a card reader, elsewhere in the IP-AK2 system.
• Outputs – switches located on the IP-AK2 panel that are connected to output
devices, such as a door lock, elsewhere in the IP-AK2 system.
• System Status –IP-AK2 system status.
Alarms
Alarms are system-generated messages that indicate the need for user attention. Select
Monitoring Æ Alarms and all unacknowledged alarms will display.
Figure 5-55 Unacknowledged/ Acknowledged Alarm Number
Check the box before the alarms and acknowledge the selected alarms.
Figure 5-56 Monitoring->Alarm
By clicking “Acknowledged”, the view can be switched between “Unacknowledged” and
“Acknowledged”.
Figure 5-57 Monitoring->Alarms->“Acknowledged”
43
To Next Page
Loading...
