Honeywell IP-AK2 User Manual

Honeywell
1 About This Document
Thank you for purchasing the IP-AK2 Access Control Unit!
This user guide is designed to be a reference for the installation and configuration of IP-
AK2 Access Control Unit.
Overview of Contents
This document contains the following chapters:
• Chapter 1, About This Document, a brief introduction of “IP-AK2 Access Control
Unit User Guide”.
• Chapter 2, Introduction, general information about IP-AK2 Access Control Unit
components, including IP-AK2 Access Control Panel, Power Supply, Battery, and
Enclosure.
• Chapter 3, Installation, describes how to install IP-AK2 panel, mount the cabinet,
wire the components, set dip switches, and so on.
• Chapter 4, Connecting to IP-AK2 Access Control System, gives a diagrammatical
instruction on how to connect IP-AK2 panel to Access Control System.
• Chapter 5, Configuring via IP-AK2 Web Server, introduces how to configure IP-AK2
panel settings through IP-AK2 Web Server.
• Chapter 6, Specifications and Panel Wiring, shows IP-AK2 Access Control Unit
specifications and panel wiring diagram.
• Chapter 7, Maintenance, introduces the maintenance information.
• Chapter 8, Troubleshooting, introduces troubleshooting problems and resolutions.
• Appendix A, Miscellaneous, introduces basic standalone operations and IP-AK2
panel defaults.
1

Honeywell IP-AK2 Specifications

General

Brand	Honeywell
Model	IP-AK2
Category	Switch
Language	English