Honeywell IP-AK2 - Networking Settings Description; Web Configuration; Session Timeout Setting

Configuring via IP-AK2 Web Server
Figure 5-53 Networking Settings Page
1. Refer to the table below for field descriptions and make corresponding changes.
Table 5-10 Networking Settings Description
Setting Description
IP Address IP address
Subnet Mask subnet mask
Networking
Default Gateway default gateway
Baud Rate
Specifies the transmission rate (bits per second) among
the downstream panels in the loop.
Loop
Panel ID The address of the master panel in the loop.
2. Click【Update】to submit changes.
Web Configuration
Click Web Configuration to display web configuration page and edit Session Timeout
setting.
Figure 5-54 Web Configuration
Modifying Session Timeout Setting
Web session timeout specifies that the time period that a user’s session remains valid.
The session will be cleared after the user has been idled for longer than this setting.
1. Enter desired values in the textbox.
2. Click【Update】.
42