Honeywell IP-AK2 - Configuring via IP-AK2 Web Server; Connecting to IP-AK2 Web Server; Connecting Panel to Computer

Honeywell
5 Configuring via IP-AK2 Web Server
IP-AK2 panel is a two-reader access controller with built-in web server. Through
standard web browser, up to 20 doors can be controlled and monitored.
IP-AK2 panel supports two kinds of web browsers:
• Internet Explore 6.0
• Firefox 3.0
Note
If not noticed, all operations in this manual are performed in Internet Explore 6.0.
All function tests have been passed using web browser in Windows XP
Professional. Do not guarantee web browser compatibility in other operation
system.
Connecting to IP-AK2 Web Server
Before connecting to the IP-AK2 Web Server, The IP-AK2 panel must be connected to
the Computer first, and then the network connection should be configured.
Connecting Panel to Computer
There are two ways to connect IP-AK2 panel to computer, see below:
Figure 5-1 IP-AK2 Web Server Hub Connection
IP-AK2
Ethernet
Cable
Ethernet Hub
Connect the computer’s Ethernet port and the IP-AK2 panel’s
Ethernet port to an Ethernet Hub or switch with standard straight-
through Ethernet patch cables.
15