Honeywell
Figure 5-26 Modify Interlock
2. Change Interlock settings.
3. Click【OK】to accept changes.
Disable/Enable Interlocks
Click Disable/Enable hyperlink at the end of the row to disable/enable an interlock.
Deleting Interlocks
1. Check all the boxes in front of the interlocks to be deleted in the list.
2. Click【Delete】above the list.
3. Click【OK】on the prompt window.
Data Management
All configurations will be saved in panel’s database. On this page, you can download
database from a panel or upload database to a panel overwriting existing data. The page
is especially useful when changing a panel already been configured successfully.
All configuration data can be saved into three databases:
Table 5-3 Database Categories
Category Description
Common Database
This database includes Time Zones, Holidays, Site Codes and
Access Levels. Data in this database are supposed to be identical on
all panels.
Panel Database
This database includes Panel Attributes, Interlocks, and Card
Formats. Data in this database is specific to panel.
Card Database
This database includes Cards. Data in this database are supposed to
be identical on all panels.
27
To Next Page
Loading...
Need help?
General
