Configuring via IP-AK2 Web Server
Figure 5-27 Data Management Page
Download
Click the【Download】hyperlink of a category to download the database file from panel
to computer..
Upload
Click the【Browse…】button to select the database file from computer to upload it.
Click the【Upload】button to send the database to the panel.
Auto-Backup
Alarms and events record what had happened in the system. It is important for accident
analysis. Due to memory limit, old alarms or events will be overwritten. IP-AK2 provides
event auto-backup mechanism to avoid event lost. When auto-backup function is
enabled, event and alarm will be transferred to remote ftp server automatically when
threshold value user defined is reached. For enabling auto-backup function successfully,
user should provide ftp server address and authority information.
Refer to the table below for the auto-backup configuration description:
Table 5-4 Auto Backup Description
Setting Description
Enable Specifies if the auto backup function is enabled.
FTP Address The IP address of the ftp server.
Directory
Specifies in which directory of the ftp server the database will be uploaded
to.
User Name Specifies the user name to be used to log on the ftp server.
Password Specifies the password to be used to log on the ftp server.
28
To Next Page
Loading...
