Honeywell XENON 1902 User Manual

CHAPTER
4
Xenon/Granit User Guide 81
CORDLESS SYSTEM OPERATION:
XENON 1902G-BF
Note: This chapter applies only to Xenon 1902g-BF cordless scanning systems. It does not
apply to corded scanners, Xenon 1902g/1912, or Granit 1911i/1981i scanners. See
Cordless System Operation: Xenon 1902g/1912 and Granit 1911i/1981i beginning
on page 43 for other Xenon and Granit cordless scanning systems.
How the CCB01-010BT-07N-BF Cordless Charge Base
Works
A cordless charge base provides the link between the cordless scanner and the
host system. The base contains an interface assembly and an RF communication
module. The RF communication module performs the data exchange between the
cordless scanner and the interface assembly. The control assembly coordinates
the central interface activities including: transmitting/receiving commands and
data to/from the host system, performing software activities (parameter menuing,
visual indicator support, power-on diagnostics), and data translation required for
the host system.
The cordless charge base is also a scanner’s instant charge pack charger. Refer to
Charge Information, page 85, for additional information.

Honeywell XENON 1902 Specifications

General

Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
Battery life	14 h
Charging time	4.5 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	50000
Power consumption (standby)	0.5 W
Shockproof	Yes
Certification	CE, UL
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	214 g
Base weight	179 g
Base dimensions	132 x 102 x 81 mm