200 Xenon/Granit User Guide
code. To adjust the redundancy, scan the Straight 2 of 5 IATA Redundancy bar code
below, then scan a redundancy count between 0 and 10 on the Programming
Chart, beginning on page 353. Then scan the Save bar code. Default = 0.
Straight 2 of 5 IATA Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 188) for additional information. Minimum and Maximum
lengths = 1-48. Minimum Default = 4, Maximum Default = 48.
Matrix 2 of 5
<Default All Matrix 2 of 5 Settings>
Matrix 2 of 5 On/Off
Straight 2 of 5 IATA
Redundancy
To Next Page
Loading...
