Honeywell XENON 1902 User Manual

Xenon/Granit User Guide 89
Base Charge Status
When charging, the base indicates the progress while the scanner resides in the
base.
* The number of scans was measured with a clearly printed UPC code in good light.
The approximate number of scans varies with changes in label quality, symbology,
and environmental factors.
Base Power Communication Indicator
To display the power indicator on a base, scan the Base Power Communication
Indicator On bar code. To turn off the power indicator, scan the Off bar code.
Default = On.
Reset Scanner
Scanning this bar code reboots the scanner and causes it to relink with the base.
Base Charge Modes
When the base has both an external power supply (plugged into the auxiliary power
port) and a host interface cable, it will draw its power from the external power sup-
ply. When the base does not have an external power supply, it draws its power from
Base Button/LED Charge Level
Approximate Expected
Scans*
Green on 100% 450
Green slow blink 50-99% 200
Green fast blink 30-50% 100
Yellow fast blink 0-30% Charging - do not scan
* Base Power Communication
Indicator On
Base Power Communication
Indicator Off
Reset Scanner

Honeywell XENON 1902 Specifications

General

Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
Battery life	14 h
Charging time	4.5 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	50000
Power consumption (standby)	0.5 W
Shockproof	Yes
Certification	CE, UL
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	214 g
Base weight	179 g
Base dimensions	132 x 102 x 81 mm