Honeywell XENON 1902 User Manual

150 Xenon/Granit User Guide
Silent Mode with Long LED
Scan the following bar code to completely silence the Xenon 1900h scanner or
Xenon 1902h scanner and base. The scanner beep, base beep, base and scanner
power up beep, and scanner linking sounds are all silenced. When a bar code is
scanned, the LED and aimer remain solidly lit for 1 second. Green indicates a good
scan, red indicates a bad scan.
Very Low Beeper (Nighttime Mode)
The following bar code silences the base, and sets the scanner for a very low beep
when reading bar codes. After scanning this code, the base beep, base and scanner
power up beep, and scanner linking sounds are all silenced. When a bar code is
scanned, the scanner emits a very soft beep.
Silent Mode with Long LED -
Cordless Scanner and Base
Silent Mode with Long LED -
Corded Scanner
Nighttime Mode -
Cordless Scanner and Base
Nighttime Mode -
Corded Scanner

Honeywell XENON 1902 Specifications

General

Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
Battery life	14 h
Charging time	4.5 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	50000
Power consumption (standby)	0.5 W
Shockproof	Yes
Certification	CE, UL
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	214 g
Base weight	179 g
Base dimensions	132 x 102 x 81 mm