Honeywell XENON 1902 User Manual

158 Xenon/Granit User Guide
Direct Illumination - Top and Bottom
This setting enables both top and bottom illumination. It is recommend when read-
ing printed label bar codes and DPMs on highly reflective surfaces.
Direct Illumination - Bottom
This setting enables just the bottom illumination. It is recommend when primarily
reading dot peen bar codes. You may need to tilt the scanner at an angle to read
from reflective surfaces.
Indirect Illumination
This setting is recommend when reading bar codes on curved or rough surfaces.
Low Contrast Data Matrix Enhancements
The Granit 1920i scanner reads low contrast Data Matrix codes by default. How-
ever, if you are having trouble reading non-dot peen Data Matrix bar codes, it may
be helpful to scan Low Contrast Data Matrix Enhancements Off
. Default = Low
Contrast Data Matrix Enhancements On.
Direct Illumination -
Top and Bottom
Direct Illumination -
Bottom
Indirect Illumination
* Low Contrast Data Matrix
Enhancements On

Honeywell XENON 1902 Specifications

General

Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
Battery life	14 h
Charging time	4.5 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	50000
Power consumption (standby)	0.5 W
Shockproof	Yes
Certification	CE, UL
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	214 g
Base weight	179 g
Base dimensions	132 x 102 x 81 mm