EasyManuals Logo

Honeywell XENON 1902 User Manual

Honeywell XENON 1902
376 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Xenon/Granit User Guide 87
Low Power Alert Range
Set the power range that will trigger a low power alert. Default = 10-30%.
Low Power Alert Flash Number
You can program the scanner’s LEDs to flash up to 9 times for the low power alert.
If the Low Power Alert Beep (page 88) is on, a double beep will sound with each
flash. To set the number of low power flashes, scan the bar code below and then
scan a digit (1-9) bar code from the Programming Chart, beginning on page 353,
then Save. Default = 3 flashes.
Interval Between Flashes
Set the length of time, in seconds, between the LED flashes for a low power alert. To
set the interval, scan the bar code below and then scan a digit (1-9) bar code from
the Programming Chart, beginning on page 353, then Save. Default = 2 seconds
between flashes.
Low Power Alert Repeat
Set how many times you want the low power flash pattern (flashes and intervals) to
repeat. To set the number, scan the bar code below and then scan a digit (1-5) bar
code from the Programming Chart, beginning on page 353, then Save. Default = 1.
*Low Power Alert 10-30%
Low Power Alert 10-50%
Low Power Alert Flash Number
Interval Between Flashes
Low Power Alert Repeat

Table of Contents

Other manuals for Honeywell XENON 1902

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell XENON 1902 and is the answer not in the manual?

Honeywell XENON 1902 Specifications

General IconGeneral
Operating frequency2400 - 2500 MHz
Standard interfacesBluetooth
Connectivity technologyWireless
Sensor typeLaser
Scanner type1D/2D
Pitch reading angle-45 - 45 °
Light levels (direct sunlight)0 - 100000 lx
Linear (1D) barcodes supported-
Battery life14 h
Charging time4.5 h
Input voltage5 V
Battery capacity1800 mAh
Power source typeBattery
Number of reads per charge50000
Power consumption (standby)0.5 W
ShockproofYes
CertificationCE, UL
Product colorBlack
International Protection (IP) codeIP41
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth104 mm
Width71 mm
Height160 mm
Weight214 g
Base weight179 g
Base dimensions132 x 102 x 81 mm

Related product manuals