124 Xenon/Granit User Guide
Scan Presentation Centering On, then scan one of the following bar codes to
change the top, bottom, left, or right of the centering window. Then scan the per-
cent you want to shift the centering window from the Programming Chart, begin-
ning on page 353, then Save. Default Presentation Centering = 40% for Top and
Left, 60% for Bottom and Right.
In-Stand Sensor Mode
Note: The In-Stand Sensor feature only applies to Xenon 1900, 1900h, 1902, and 1902h
products. It does not apply to the Xenon 1902g-BF or Granit products.
Presentation Centering On
* Presentation Centering Off
Top of Presentation
Centering Window
Bottom of Presentation
Centering Window
Left of
Presentation Centering
Window
Right of Presentation
Centering Window
To Next Page
Loading...
