Honeywell XENON 1902 User Manual

12 Xenon/Granit User Guide
Reading Techniques
Xenon 1900/1902 and Granit 1910i/1911i
The Xenon 1900/1902 scanners have a view finder that projects a bright red aim-
ing beam that corresponds to the scanner’s horizontal field of view. The Granit
1910i/1911i scanners have an aiming pattern. The aiming beam or pattern should
be centered over the bar code, but it can be positioned in any direction for a good
read.
Granit 1980i/1981i
The Granit 1980i/1981i scanners use a laser aimer (red dot) and a red LED (red
box) to locate bar codes. Use the red LED when scanning at a near distance (less
than 11.8 inches / 30 cm) and center the box over the bar code. The laser aimer
(red dot) appears to the right of the center of the bar code. Use the laser aimer (red
dot) when scanning at a far distance (up to 50 feet / 15.2 meters) and aim at the
Linear bar codes with
aiming beam
2D Matrix symbol
with aiming beam
Linear bar codes with
aiming pattern
2D Matrix symbol
with aiming pattern

Honeywell XENON 1902 Specifications

General

Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
Battery life	14 h
Charging time	4.5 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	50000
Power consumption (standby)	0.5 W
Shockproof	Yes
Certification	CE, UL
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	214 g
Base weight	179 g
Base dimensions	132 x 102 x 81 mm