272 Xenon/Granit User Guide
Menu Commands
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page
Product Default Settings
Set Custom Defaults Set Custom Defaults MNUCDP 14
Save Custom Defaults MNUCDS 14
Reset the Custom Defaults Activate Custom Defaults DEFALT 14
Reset the Factory Defaults -
cordless scanners
Factory Default Settings:
All Application Groups
PAPDFT& 70
Reset the Custom Defaults -
cordless scanners
Custom Default Settings:
All Application Groups
PAPDFT 71
Program the Interface
Plug and Play Codes Keyboard Wedge:
IBM PC AT and Compatibles with
CR suffix (not supported by Granit
1980i)
PAP_AT 17
Laptop Direct Connect with CR
suffix (not supported by Granit
1980i)
PAPLTD 18
RS232 Serial Port PAP232 18
Plug and Play Codes:
RS485
IBM Port 5B Interface PAPP5B 18
IBM Port 9B HHBCR-1 Interface PAP9B1 18
IBM Port 17 Interface PAPP17 19
IBM Port 9B HHBCR-2 Interface PAP9B2 19
RS485 Packet Mode On RTLPDF1 19
RS485 Packet Mode Off RTLPDF0 19
RS485 Packet Length (20-256) RTLMPS 20
Plug and Play Codes: IBM SurePos USB IBM SurePos Handheld PAPSPH 20
USB IBM SurePos Tabletop PAPSPT 20
Plug and Play Codes: USB USB Keyboard (PC) PAP124 20
USB Keyboard (Mac) PAP125 21
USB Japanese Keyboard (PC) TRMUSB134 21
USB HID PAP131 21
USB Serial TRMUSB130 21
CTS/RTS Emulation On USBCTS1 21
CTS/RTS Emulation Off* USBCTS0 22
ACK/NAK Mode On USBACK1 22
ACK/NAK Mode Off* USBACK0 22
Remote MasterMind for USB ReM Off REMIFC0 22
ReM On REMIFC1 22
To Next Page
Loading...
Need help?
General
Weight and Dimensions
