Honeywell XENON 1902 User Manual

152 Xenon/Granit User Guide
Number of LED Flashes
If you have silenced the scanner’s beeper, you may set the number of times the
LED flashes when reading bar codes. Default = 1 LED Flash.
Note: If you have set LED Solid (No Flash) (page 153), to anything but Off, that setting will
override the LED Flash settings. In that case, scan the LED Solid Off bar code to turn
off this feature, then scan the LED Flash code you wish to use.
LED Flash Rate
If you have silenced the scanner’s beeper, you may set the how quickly the LED
flashes when reading bar codes. Default = Fast Flash.
* 1 LED Flash
5 LED Flashes
10 LED Flashes
25 LED Flashes
* Fast Flash
Medium Flash
Slow Flash

Honeywell XENON 1902 Specifications

General

Operating frequency	2400 - 2500 MHz
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Sensor type	Laser
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
Battery life	14 h
Charging time	4.5 h
Input voltage	5 V
Battery capacity	1800 mAh
Power source type	Battery
Number of reads per charge	50000
Power consumption (standby)	0.5 W
Shockproof	Yes
Certification	CE, UL
Product color	Black
International Protection (IP) code	IP41
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Sustainability certificates	RoHS

Weight and Dimensions

Depth	104 mm
Width	71 mm
Height	160 mm
Weight	214 g
Base weight	179 g
Base dimensions	132 x 102 x 81 mm