120 Xenon/Granit User Guide
Trigger Number
This sets the number of trigger preses required to activate the Trigger Toggle Mode.
Trigger Timing
This sets the timing of the trigger presses in order to qualify as a trigger toggle,
rather than a regular trigger press. After scanning the Trigger Timing bar code, set
the time-out duration (from 50-2,000 milliseconds) by scanning digits from the
Programming Chart, beginning on page 353, then Save. Default = 400ms.
Trigger Toggle - Image Capture
Trigger Toggle - Cell Phone Read
Trigger Toggle - Centering
To Next Page
Loading...
