Honeywell XENON 1902

290 Xenon/Granit User Guide
Low Contrast Data Matrix
Enhancements
* Low Contrast Data Matrix
Enhancements On
DEPMENA1 158
Low Contrast Data Matrix
Enhancements Off
DPMENA0 159
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 163
Prefix Add Prefix PREBK2## 163
Clear One Prefix PRECL2 163
Clear All Prefixes PRECA2 163
Suffix Add Suffix SUFBK2## 163
Clear One Suffix SUFCL2 163
Clear All Suffixes SUFCA2 163
Function Code Transmit *Enable RMVFNC0 164
Disable RMVFNC1 164
Intercharacter Delay Range 0 - 1000 (5ms increments) DLYCHR## 164
User Specified
Intercharacter Delay
Delay Length
0 - 1000 (5ms increments)
DLYCRX## 165
Character to Trigger Delay DLY_XX## 165
Interfunction Delay Range 0 - 1000 (5ms increments) DLYFNC## 165
Intermessage Delay Range 0 - 1000 (5ms increments) DLYMSG## 166
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3 168
Show Data Format DFMBK3? 168
Enter Data Format DFMBK3## 169
Clear One Data Format DFMCL3 169
Clear All Data Formats DFMCA3 169
Data Formatter Data Formatter Off DFM_EN0 183
*Data Formatter On,
Not Required,
Keep Prefix/Suffix
DFM_EN1 184
Data Format Required,
Keep Prefix/Suffix
DFM_EN2 184
Data Formatter On,
Not Required,
Drop Prefix/Suffix
DFM_EN3 184
Data Format Required,
Drop Prefix/Suffix
DFM_EN4 184
Data Format Non-Match Error Tone *Data Format Non-Match Error
Tone On
DFMDEC0 184
Data Format Non-Match Error
Tone Off
DFMDEC1 185
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page