105
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays information about ABR summary routes for all OSPF processes.
area area-id: Specifies an OSPF area by its ID. The area ID is an IP address or a decimal integer in the
range of 0 to 4294967295 that is translated into the IP address format. Without this option, the
command displays information about ABR summary routes for all OSPF areas.
ip-address: Specifies a summary route by its IP address.
mask-length: Specifies the mask length in the range of 0 to 32.
mask: Specifies the mask in dotted decimal notation.
verbose: Displays detailed ABR summary route information. Without this keyword, the command
displays brief ABR summary route information.
Usage guidelines
If no IP address is specified, this command displays information about all summary routes on the ABR.
Examples
# Display brief information about summary routes on the ABR.
<Sysname> display ospf abr-summary
OSPF Process 1 with Router ID 2.2.2.2
ABR Summary Addresses
Area: 0.0.0.1
Total summary addresses: 1
Net Mask Status Count Cost
100.0.0.0 255.0.0.0 Advertise 1 (Not Configured)
Table 26 Command output
Field Descri
tion
Area Area to which the summary routes belong.
Total summary addresses Total number of summary routes.
Net Address of the summary route.
Mask Mask of the summary route address.
Status Advertisement status of the summary route.
Count Number of summarized routes.
Cost Cost to the summary network.
# Display detailed information about summary routes on the ABR.
<Sysname> display ospf abr-summary verbose
OSPF Process 1 with Router ID 2.2.2.2
To Next Page
Loading...
Need help?
General
