195
Syntax
display isis lsdb [ [ level-1 | level-2 ] | local | [ lsp-id lspid | lsp-name lspname ] | verbose ] *
[ process-id ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level-1: Displays the level-1 LSDB.
level-2: Displays the level-2 LSDB.
local: Displays LSP information generated locally.
lsp-id lspid: Specifies an LSP ID, in the form of sysID. Pseudo ID-fragment num, where sysID represents the
originating node or pseudo node, and Pseudo ID is separated by a dot from sysID and by a hyphen from
fragment num.
lspname: Specifies the LSP name, in the form of Symbolic name.Pseudo ID-fragment num, where Pseudo
ID is separated by a dot from Symbolic name and by a hyphen from fragment num. If the Pseudo ID is 0,
specify the LSP name in the form Symbolic name-fragment num.
verbose: Displays LSDB detailed information. Without this keyword, the command displays brief
information about LSDB.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535 to display the LSDB of the IS-IS
process. Without this argument, the command displays LSDBs for all IS-IS processes.
standby slot slot-number: Displays backup IS-IS LSDB information for an IRF member device. Without this
option, the command displays IS-IS LSDB information.
Usage guidelines
If no level is specified, the command displays both Level-1 and Level-2 LSDB information.
Examples
# Display brief Level-1 LSDB information.
<Sysname> display isis lsdb level-1
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
---------------------------
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
-------------------------------------------------------------------------------
5555.1111.1111.00-00 0x00000006 0x8519 1150 75 0/0/0
5555.1111.1111.00-01 0x00000001 0x4995 1139 41 0/0/0
7777.8888.1111.00-00* 0x00000020 0xceeb 1159 68 0/0/0
7777.8888.1111.01-00* 0x00000004 0xb4a4 1150 55 0/0/0
To Next Page
Loading...
Need help?
General
