289
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters.
ip-address: Specifies a peer by its IP address.
log-info: Displays log information.
verbose: Displays detailed information.
Usage guidelines
If no parameter is specified, this command displays brief information about all BGP peers for the
specified address family.
Examples
# Display brief information about all BGP IPv4 unicast peers for the public network.
<Sysname> display bgp peer ipv4
BGP local router ID: 192.168.100.1
Local AS number: 100
Total number of peers: 1 Peers in established state: 1
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.2.1.2 200 13 16 0 0 00:10:34 Established
Table 75 Command output
Field Description
Peer IP or IPv6 address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv
For the IPv4, IPv6, VPNv4, and VPNv6 address families, this field
displays the number of prefixes received from the peer.
For MPLS L2VPN, this field displays the number of label blocks received
from the peer.
For VPLS, this field displays the total number of label blocks and VPLS
PEs discovered by BGP.
Up/Down Lasting time of the current BGP session state.
State Current state of the BGP session between the local router and the peer.
# Display detailed information about BGP IPv4 unicast peer 10.2.1.2 for the public network.
<Sysname> display bgp peer ipv4 10.2.1.2 verbose
Peer: 10.2.1.2 Local: 192.168.100.1
Type: EBGP link
BGP version 4, remote router ID 192.168.100.2
BGP current state: Established, Up for 00h11m10s
BGP current event: RecvKeepalive
To Next Page
Loading...
Need help?
General
