HP 5920 Series - Page 425

412
Parameters
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed IPv6 static route next hop information. Without this keyword, the command
displays brief IPv6 static route next hop information.
Examples
# Displays brief IPv6 static route next hop information.
<Sysname> display ipv6 route-static nib
Total number of nexthop(s): 35
NibID: 0x21000000 Sequence: 0
Type: 0x41 Flushed: Yes
UserKey0: 0x0 VrfNthp: 0
UserKey1: 0x0 Nexthop: 2::3
IFIndex: 0x0 LocalAddr: ::
NibID: 0x21000001 Sequence: 1
Type: 0x41 Flushed: Yes
UserKey0: 0x0 VrfNthp: 0
UserKey1: 0x0 Nexthop: 3::4
IFIndex: 0x0 LocalAddr: ::
...
Table 97 Command output
Field Descri
p
tion
NibID ID of the NIB.
NibSeq Sequence number of the NIB.
Type Type of the NIB.
Flushed
Indicates whether the route with the NIB has been flushed to the
FIB.
UserKey0 Reserved data 1.
UserKey1 Reserved data 2.
VrfNthp VPN instance to which the next hop belongs.
Nexthop Next hop address.
IFIndex Interface index
LocalAddr Local interface address.
# Displays detailed IPv6 static route next hop information.
<Sysname> display ipv6 route-static nib verbose
Total number of nexthop(s): 35
NibID: 0x21000000 Sequence: 0
Type: 0x41 Flushed: Yes
UserKey0: 0x0 VrfNthp: 0