HP 8753E - Page 465

‘lhble 7-12. HP 8753E Instrument Specifications (3 of 6)
B CHANNEL INPUT
Deeeription specification Code
Prequency onset operation*t
Frequency Range* 3OOkI-IZtO6GHZ
B Channel Input Requirements Oto-35dBm,to3GIIz
(required for phase-locked operation) Oto-3OdBm,3GIIzto6Gl-lz
Oto-3OdBm,3GIIzto6GBz
LGSpectrolPlllitFZlIldAccuracy
Maximum Bpurious Input
<-25 dBc
Residual FM <20 kHz
Frequency Accuracy
-1 to + 1 MB2 of nomiual frequency
Acmuacp (see Magnitude Characteristics and Phase Characteristics)
External Source Modet 5 (CW Time sweep only)
Frequency Rams
$
3OOkHzto6GHz
R Input Requirements
Power Level
Oto-26dBm
BpectralPurity
Maximum Bpurious Input
<-3odBc
Residual FM
<20 kBz
Setting Time
Auto
5ooms
Manual
5onls
Frequency Readout Accuracy (auto)
0.1%
Input Frequency Margin
Manual
-0.6 to 5 MHz
Auto
550 MI-IA
f6 MB2 of nominal CW frequency
>50 MI-k
flO% of nominal CW frequency
Accuracy (see Magnitude Characteristics and Phase Charactmistics)~
S-l
Sl
S-l
S-l
T
T
T
S-l
T
T
T
T
T
T
T
T
T
The BP 8763E RF source characteristics in this mode are dependent on the stability of the external Lo source.
L’he RF source tracks the LC to nu&tain a stable IF signal at the R channel receiver input. Degradation in
tccuraq is negligible with an BP &WA/B or BP 8666B RF signal generator as the Lo source.
Refer to “BP 8753E Descriptions and Options” for a functional description.
: Operation from 3 GHz to 6 GI-Iz requires option 006.
I Measurement
eccunxy is dependent on the stability of the input signal.
7-12 Spscifications and Measurement Uncertainties