HP 8753E - Page 466

‘Ihble 7-12. HP 8753E Instrument Specifhtions (4 of 6)
INPUT GENBBAL
Description
Speciftcation
bfAGNITUDE CHABACTBBISTICS
Display Resolution
0.01 dB/division
Marker* Resolution
0.001 dB
Dynamic-
IF BW: 10 Hz, averaging factor: 1, inputs: test port 1 and 2 (R to -35 dBm)
For test port powers > -50 dBm, magnitude dynamic accuracy is
0.02 dB + 0.001 dB/dB from the reference power (plus the effects of sampler
compression).
The following graphs include the effects of noise.
co&
s-:
s:
s-l
HP8753E Magnitude Dynamic Accuracy 0.3 to 3000 MHz
HP8753E Magnitude Dynamic Accuracy 3-8 GHz
0.01 0.01
10 0 -10 -20 -30 -40 -50 -60 -70-80 -90 -100 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100
Test Port Power (dBm) Test Port Power (dBm)
Trace Noiset
3OOkHztoSGHz
3GHzt.06GHz
Reference Level
Resoltiion
Stability
3OOkHzto3GHz
3GHzto6GIIz
<0.006 dB rms
s-1
<O.OlO dB rms
s-l
f500 dJ3 53
0.001 dB s-3
0.02 dBPC
‘I
0.04 dB/w
T
?HAsE cEABAcTEBIsTIcs
Display Resolution
Marker Resolution*
fl&?O o
s-3
0.01 oldivision
s-3
0.01 o
s3
’ Marker resolution for magnitude, phase, and delay is dependent upon the value measured, resolution is limited
n5digit8.
. CW sweep, + 6 dBm into ‘l&t Port, ratio measurement, 3 kHz BW
Specifications and Measurement Uncertainties 7-13