HP 9000 Series Service Manual

11-16 Chapter 11
SCSI Peripherals and I/O Information
14 00 A Medium Error was Detected during a Read, Space, Locate (sense key 3)
14 01 Record Not Found
14 02 Filemark not Found
14 03 End of Data NOT Found
14 03 End of data found
14 04 Block Sequencer Error
15 00 Seek position error
15 00 Mechanical Positioning Error
15 00 No Information at this position on Tape, Cannot do Space Operation (sense
key 3)
15 00 Random Positioning Error
15 01 Mechanical Positioning Error
15 01 Servo Hardware Failure
15 02 Positioning Error Detected by Read of Medium (sense key 9)
16 00 Data Synchronization Mark Error
17 00 Recovered Read data with retries (not with ECC)
17 01 Recovered Data with retries
17 02 Recovered Data Using Positive Offset
17 03 Recovered Data Using Negative Offset
17 04 Recovered Data with Retries and /or CIRC Applied
17 05 Recovered Data using Previous Sector ID
17 06 Recovered Data Without ECC - Data Auto Reallocated
18 00 Recovered Read data with ECC (not with retries)
18 01 Recovered Data with ECC and Retries Applied
18 02 Recovered Data with ECC and/or Retries, Data Auto-Reallocated
18 04 Recovered Data with LEC
18 05 Recovered Data - Recommend Reassignment
19 00 Defect List error
19 01 Defect List Not Available
19 02 Defect List Error in Primary List
1A 00 Parameter Overrun
ASC ASCQ Description

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome