HP 9000 Series Service Manual

Chapter 11 11-17
SCSI Peripherals and I/O Information
1A 00 Illegal Transfer Length in the CDB (sense key 5)
1B 00 Synchronous data transfer error
1C 00 Defect List not Found
1C 01 Primary Defect List not Found
1D 00 Compare errors
1D 00 Miscompare During Verify Operation
20 00 invalid Command Operation Code
21 00 illegal Logical Block Address
21 01 Invalid Element Address
24 00 Illegal field in Command Descriptor Block (CDB)
25 00 Invalid Logical Unit Number (LUN)
26 00 Invalid filed in Parameter List
26 01 Invalid element address
26 01 Parameter not Supported by the Devices Boot Code (sense key 3)
26 01 Parameter not Supported
26 02 Invalid transport element
26 02 Parameter Value Invalid
26 02 Write Buffer Parameter Invalid
26 03 Invalid source element
26 03 Invalid Field Parameter - Threshold Parameter
26 04 Invalid destination element
26 05 Invalid second destination element
26 06 Illegal function
26 07 Transport full
26 08 Destination full
26 09 Source full
26 0A Exchange first destination full
26 0B Exchange first second destination full
26 98 Invalid Field Parameter - Check Sum
26 99 Invalid Field Parameter - Firmware Tag
ASC ASCQ Description

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome