11-18 Chapter 11
SCSI Peripherals and I/O Information
27 00 Write protected
28 00 Not ready to ready transition/medium changed
28 01 Import/Export Element Accessed
29 00 Power On or Reset or Bus device reset occurred
29 80 Power On or Reset or Bus device reset occurred and selftest failed
2A 00 Mode select Parameters changed
2A 00 Parameters Changed (Mode Select)
2A 01 Mode Parameters Changed
2A 01 MODE SELECT Parameters changed by another Initiator
2A 02 Log Parameters Changed (sense key 7)
2B 00 Copy can't execute since host can't disconnect
2C 00 Command Sequence Error
2F 00 Commands Cleared by another Initiator
2F 00 Tagged Commands Changed by another Initiator
30 00 Incompatible medium installed
30 01 Cannot Read Medium - Unknown Format
30 01 Tape format is incompatible with the CXB-8505 (sense key 3)
30 02 Cannot read media, Incompatible format
30 03 Cleaning Cartridge Installed
31 00 Media Format Error Occurred
31 01 Format Failed
31 01 The format partition operation failed (sense key 3)
32 00 No defect spare location available
33 00 Spare Operation Failed
33 00 Tape Length Error
37 00 Parameter Rounded
39 00 Saving Parameters Not Supported
3A 00 Medium not present
3B 00 Tape positioning error
3B 00 Sequential Positioning Error
ASC ASCQ Description
To Next Page
Loading...
Need help?
General
