HP 9000 Series - Page 317

Chapter 11 11-21
SCSI Peripherals and I/O Information
NOTE Some devices may have vendor unique codes which are not listed.
82 00 No Tape Required but Tape Loaded (SEND DIAGNOSTIC) (sense key 5)
82 80 Humidity too High
82 81 Dryness, Humidity falls to a level that permits access
82 82 Device Requires Cleaning
82 83 Bad Microcode Detected
84 00 Could not Change Mode Parameters since tape not at LBOT or LBOP (sense
key 5)
ASC ASCQ Description