HP 9000 Series Service Manual

11-20 Chapter 11
SCSI Peripherals and I/O Information
49 00 Inappropriate/Illegal message
4A 00 Command Phase Error
4B 00 Data Phase Error
4C 00 Microcode Programing Failed
4C 00 Logical Unit Failed Self-Configuration
4E 00 Overlapped commands attempted
50 00 Write Append Error
50 01 Write Append Position Error (sense key 3)
50 01 Write append position error, or illegal position to format partition (sense key
3)
50 01 Write Failure after Retry Limit Reached
51 00 Erase Failure
52 00 Cartridge Fault
53 00 Media Load/Eject Failed
53 01 Unload Tape Failure
53 02 Medium Removal Prevented
57 00 Unable to Recover Table-Of-Contents
5A 00 Operator Request or State Change Input (Unspecified)
5A 01 Operator Requested Media Removal
5B 00 Log Exception (Segate Factory Installed Option)
5B 01 Threshold Condition Met (Segate Factory Installed Option)
5B 01 Log Threshold Met (sense key 6)
5B 02 Log counter At Maximum (Segate Factory Installed Option)
5B 02 Log Parameter Overflow (sense key 1)
5B 03 Log List Codes EXAUSTED (Segate Factory Installed Option)
5C 00 RPL Status Change
63 00 End of User Area Encountered on This Track
64 00 Illegal Mode for this Track
70 XX Vendor Specified (See Appropriate Product Documentation)
80 00 General Firmware Error Qualifier
81 00 Mode Mismatch Fixed/Variable (sense key 5)
ASC ASCQ Description

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome