HP 9000 Series - Page 413

Appendix B B-9
Support Information
------Information Menu------------------------------------------------
Command Description
------- -----------
ALL Display all system information
BootINfo Display boot-related information
CAche Display cache information
ChipRevisions Display revisions of VLSI and firmware
COProcessor Display coprocessor information
FwrVersion Display firmware version
IO Display I/O interface information
LanAddress Display built-in LAN address
MEmory Display memory information
PRocessor Display processor information
WArnings Display selftest warning messages
BOot [PRI|ALT|<path> Boot from specified path
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
MAin Return to Main menu
-------
Information Menu: Enter command >
--Service Menu--------------------------------------------------------
Command Description
------- -----------
BootID [<proc>] [<boot ID>] Display or modify processor boot ID
ChassisCodes [<proc>] Display chassis codes
ClearPim Clear (zero) the contents of PIM
CPUconfig [<proc>] [ON|OFF] Config/deconfig processor
EempromRead [<addr>] [<len>] Read EEPROM locations
MemRead <addr> [<len>] Read memory locations
PDT [CLEAR] Display or clear
PIM [<proc>[HPMC|LPMC|TOC]] Display PIM information
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
MAin Return to Main menu
-------
Service Menu: Enter command >