HP 9000 Series Service Manual

B-10 Appendix B
Support Information
-------Main Menu Help-------------------------------------------
COnfiguration-----------------------------------------------AUto
INformation-------------------------------ALL BootINfo
SERvice------------------BootID BootINfo BootTimer
ChassisCodes CAche DAte
ClearPim ChipRevisions DEfault
CPUconfig COprocessor FastBoot
EepromRead FwrVersion PAth
MemRead IO SEArch
PDT LanAddress
PIM MEmory
PRocessor
WArnings
BOot BOot BOot
DIsplay DIsplay DIsplay
HElp HElp HElp
RESET RESET RESET
MAin MAin MAin
Type DIsplay to show the commands available from the current menu.
------Main Help ----------------------------------------------------
The Main menu is the first menu displayed when the firmware user
interface is executed. The other menus available to the user are
listed here.
Type DIsplay to view the commands available from this menu.
Other menus can be accessed by entering the name of the menu at the
command prompt. From a given menu, a command from any other menu can
be executed by entering the menu name that is associated with the
For example, to execute the DaTe command (in the Configuration menu)
from the Main menu, type "co dt"
Type HElp MAin to see all available commands listed under their
respective menus.
------

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome