HP 9000 Series Service Manual

B-14 Appendix B
Support Information
---Eepromread Help ---------------------------------------------
EepromRead reads and displays Firmware EEPROM locations.
EepromRead Display entire contents of EEPROM
EepromRead <addr> Display 64 words of EEPROM starting
at <addr>
EEpromRead <addr><len> Display BBlenEB words of EEPROM starting
at BBaddrEB
<addr>: hex or decimal byte offset in EEPROM (default = 0)
<len> : number of words to display (default = 64 words)
Short command for EEpromRead: er
------
---Help Help --------------------------------------------------
Type HElp BBcommandEB or BBmenuEB for more help.
Type DIsplay or LiSt to redisplay the current menu commands.
Short commands for HElp: he, ?
-------
---All Help ------------------------------------------------------
ALL displays information about the Processor, Firmware, Boot,
Floating Point coprocessor, IO configuration, and Memory.
-------
---Bootinfo Help -------------------------------------------------
BootINfo displays system configuration information related to
booting that is stored in non-volatile memory.
Short commands for BootINfo: bin
--------

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome