HP 9000 Series Service Manual

B-16 Appendix B
Support Information
-----IO Help---------------------------------------------------------
IO displays I/O interface information on all modules in the system.
------
----- Memory Help --------------------------------------------------
MEmory displays the amount of available memory and the amount of
configured memory.
MEmory displays the following information:
Physical Memory: Total amount of memory in the system
Configured Memory: Usable memory that has been configured
Short command for MEmory: me
-----------
----- Processor Help -----------------------------------------------------
PRocessor displays information about the processors present
in the system and some system-wide information as well.
NOTE: Processor number is same as assembly board designation.
Processors in a Stopped state are in this state due to:
Deconfigured: Processor deconfigured due to a request
prior to the current boot
NonResponding: Processor does not respond to wake up,
selftests, etc.
Failed: Processor failed one or more selftests
Short Command for PRocessor: pr
--------
----- FwrVersion Help --------------------------------------------
FwrVersion displays the version of firmware.
Short command for FwrVersion: fv
-------

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome