Appendix B B-39
Support Information
To obtain I/O map information on the system, use the I/O (in io) command in Information menu.
Main Menu: Enter command > in io
I/O MODULE INFORMATION
IODC IODC
Path (dec) Type Slot Mod HVERSION SVERSION Vers Dep
---- ---- ---- --- -------- -------- ---- ----
16 Bus Adapter 4 0 0x02f0 0x00008100 0x00 0x00
16/4 Built-in RS232 1 0 0x02f0 0x00008c00 0x01 0x00
16/5 Built-in SE SCSI 1 1 0x02f0 0x00008200 0x01 0x00
16/6 Built-in LAN 1 2 0x02f0 0x00008a00 0x02 0x00
16/0 Built-in Parallel 0 0 0x02f0 0x00007400 0x00 0x00
16/7 Built-in Keyboard 1 3 0x02f0 0x00008400 0x00 0x00
16/8 Built-in Mouse 2 0 0x02f0 0x00008400 0x00 0x00
20 Bus Adapter 5 0 0x0310 0x00008e00 0x00 0x00
20/2 RS232 Port 0 2 0x0310 0x00008c00 0x01 0x00
20/5 Bus Adapter 1 1 0x0310 0x00009000 0x00 0x00
Hot Swap module is present.
EISA Cards
Path Type EISA ID
---- ---- -------
20/5/1 Single-Ended SCSI card HWP0C80
20/5/2 PSI card HWP1870
20/5/3 E/4811 FDDI controller card INP0100
20/5/4 Smart 16/4 Ringnode card MDG0002
20/5/5 802.3 LAN adapter card HWP1850
20/5/6 SS8-E 8 port mux card EQX2020
20/5/7 Single-Ended SCSI card HWP0C80
20/5/8 Low-cost PSI card HWP19A0
I/O Module Information Example
To Next Page
Loading...
