B-38 Appendix B
Support Information
Table B-4 BCH Warning Messages for D200/Dx10/Dx20/Dx30/D390/Rx90 Systems
Warning Message Definition Description
WARNING: The System board LAN ID is different from
the Processor board LAN ID.
WARNING: The System board LAN ID has not been set.
WARNING: Setting DEFAULTS has failed.
WARNING: Problems encountered configuring memory.
For more details, use the MEMORY command
in the INFORMATION menu.
WARNING: The Bus Adapter has failed.
WARNING: The EISA adapter has failed.
WARNING: The Bus Converter has failed.
WARNING: The Processor has failed selftest.
WARNING: The Processor has failed selftest due to a
co-processor failure.
"WARNING: Not enough memory to boot to
OS."
While the boot console handler is coming up,
if not enough memory is detected
"WARNING: Stop boot flag set - system
cannot boot."
If the Stop Boot flag is set (while the boot
console handler is coming up)
To Next Page
Loading...
