HP A5120 EI Series Configuration Guide

167
Configure the third-party devices between Provider A and Provider B as follows: configure the port that
connects GigabitEthernet 1/0/3 of Provider A and the port that connects GigabitEthernet 1/0/1 of
Provider B to allow tagged frames of VLAN 1000 and VLAN 2000 to pass through.

HP A5120 EI Series Specifications

General

Uplink Ports	4 x SFP
Stacking	No
Management	CLI, Web, SNMP
Routing Protocols	RIP, OSPF
Power Supply	AC
MAC Address Table Size	16K
Dimensions	440 x 430 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Model	HP A5120-24G EI Switch (JG234A)
VLANs	4094