HP EVA P6000 User Manual

2. Click Yes to start the general configuration wizard (see Figure 54 (page 114)). Use the Wizard
to:
• Choose iSCSI HBA port to configure the QLogic iSCSI HBA.
• Configure HBA Port network settings.
• Configure HBA Port DNS settings (optional).
• Configure SLP Target Discovery settings (optional).
• Configure iSNS Target Discovery settings (optional).
Figure 53 Connect to host screen
Figure 54 Start general configuration wizard
Adding targets to QLogic iSCSI Initiator
To add the HBA Port iSCSI targets:
1. Click the green plus sign (see Figure 55 (page 115)).
2. Enter the first iSCSI or iSCSI/FCoE module's target port IP address.
114 iSCSI or iSCSI/FCoE configuration rules and guidelines

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers