HP EVA P6000 User Manual

Figure 77 Host details
Figure 78 Target tab
Issue: Windows initiators may display Reconnecting if NIC MTU changes after connection has
logged in.
Solution. Log out of those sessions and Log On again to re-establish the Connected state.
Issue: When communication between HP P6000 Command View and iSCSI or iSCSI/FCoE module
is down, use following options:
Solution 1. Refresh using Hardware > iSCSI Devices > iSCSI Controller 01 or 02 > Refresh button.
Solution 2. If the IPv4 management port IP address is set:
1. Discover the controller. This option is exposed through iSCSI controller —> Set options
—> Discover controller
160 Troubleshooting

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers