1. Follow procedures in Step 2 to:
• Create an iSCSI host.
• Present LUNs to the iSCSI host.
2. On the iSCSI HBA tab (Figure 57 (page 116) verify that the QLogic iSCSI HBA is connected to
the iSCSI LUNs in SMS under the HBA iSCSI port.
Figure 57 HBA iSCSI port connections
Use Microsoft’s iSCSI services to manage the iSCSI target login and LUN load balancing
policies.
Installing the HP MPIO Full Featured DSM for EVA
Follow the steps in the Installation and Reference Guide located at:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?
contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&
prodTypeId=18964&prodSeriesId=421492
Following the installation of the HP MPIO Full Featured DSM for EVA, open Computer Management
to view and control the iSCSI LUNs (see Figure 58 (page 117)).
116 iSCSI or iSCSI/FCoE configuration rules and guidelines