HP EVA P6000 User Manual

F iSCSI and iSCSI/FCoE module log messages
This appendix provides details about messages logged to a file. The message log is persistent
because it is maintained across module power cycles and reboots. Information in Table 31 (page
266) is organized as follows:
• The ID column specifies the message identification numbers in ascending order.
• The Log Message column indicates the message text displayed in the iSCSI or iSCSI/FCoE
module's CLI. Note that:
◦ Log messages for the iSCSI driver module are common to both iSCSI ports. Log messages
beginning with #0 denote iSCSI port 1 (GE1) and log messages beginning with #1 denote
iSCSI port 2 (GE2).
◦ Log messages for the FC driver module are common to both FC ports. Log messages
beginning with #0 denote FC port 1 (FC1) and log messages beginning with #1 denote
FC port 2 (FC2).
• The Module Type column specifies the message reporting module, where:
App = Application module◦
◦ FC = FC driver
◦ iSCSI = iSCSI driver
◦ System = System module
◦ TOE = TCP/IP offload engine module
◦ User = User module
• The Msg. Type column specifies the log message type, where:
Error = Error log message◦
◦ Fatal = Fatal log message
◦ Info = Informational log message
• The Description column provides additional information about the log message.
Table 31 iSCSI or iSCSI/FCoE module log messages
DescriptionMsg
Type
Module
Type
Log messageID
NULL doorbell routine for unloaded drivers. When
a driver is unloaded, the doorbell routine is
redirected to this NULL routine.
ErrorAppQLBA_NullDoorbell: driver
unloaded, port disabled
40967
Processing unsupported ordered tag task
management command.
ErrorAppQLBA_ProcessTrb: Processing
unsupported ordered tag
command
40996
Processing unsupported head-of-queue task
management command.
ErrorAppQLBA_ProcessTrb: Processing
unsupported head of queue
tag command
41004
Unable to create an object for the target device;
exceeded the maximum number of target devices.
ErrorAppQLBA_CreateTargetDeviceObject:
Too many devices
41058
Unable to create an object for the target node;
exceeded the maximum number of target devices.
ErrorAppQLBA_CreateTargetNodeObject:
Too many devices
41060
Memory unavailable for LUN object.ErrorAppQLBA_CreateLunObject:
LunObject memory unavailable
41067
Unable to create an object for initiator object;
exceeded the maximum number of initiators.
ErrorAppQLBA_CreateInitiatorObject:
Too many initiators
41077
266 iSCSI and iSCSI/FCoE module log messages

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers