Please select an Initiator from the list above ('q' to quit): 0
Target(WWPN) (LUN/VpGroup)
------------ -------------
50:01:43:80:04:c6:89:68 0/VPGROUP_1
50:01:43:80:04:c6:89:68 9/VPGROUP_1
50:01:43:80:04:c6:89:68 10/VPGROUP_1
50:01:43:80:04:c6:89:68 11/VPGROUP_1
50:01:43:80:04:c6:89:68 12/VPGROUP_1
50:01:43:80:04:c6:89:6c 0/VPGROUP_1
50:01:43:80:04:c6:89:6c 9/VPGROUP_1
50:01:43:80:04:c6:89:6c 10/VPGROUP_1
50:01:43:80:04:c6:89:6c 11/VPGROUP_1
50:01:43:80:04:c6:89:6c 12/VPGROUP_1
Example 2:
MEZ50 (admin) #> show initiators_lunmask
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.1991-05.com.microsoft:perf2.sanbox.com
1 iqn.1991-05.com.microsoft:perf3.sanbox.com
2 iqn.1991-05.com.microsoft:perf10.sanbox.com
Please select an Initiator from the list above ('q' to quit): 1
Target (WWNN,WWPN) LUN Number
------------------ ----------
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:38 9
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:38 10
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:38 11
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:38 13
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:3c 9
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:3c 10
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:3c 11
50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:3c 13
Show iSCSI
Displays iSCSI information for the specified port. If you do not specify the port, this command
displays all ports.
NoneAuthority
[port_num]show
iscsi
Syntax
The number of the iSCSI port to be displayed.[port_num]Keywords
Example:
MEZ50 (admin) #> show iscsi
iSCSI Port Information
------------------------
iSCSI Port GE1
Port Status Enabled
Link Status Up
iSCSI Name iqn.2004-09.com.hp:fcgw.mez50.1.0
Firmware Revision 1.0.0.0
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
MTU Size Normal
Window Size 32768
MAC Address 00-23-7d-f4-15-a5
Commands 229
To Next Page
Loading...
Need help?
General
