HP EVA P6000 User Manual

MEZ75 (admin) #> show properties
CLI Properties
----------------
Inactivty Timer Disabled
Prompt String MEZ75
Show SNMP
Displays the module’s simple network management protocol (SNMP) and any configured traps.
NoneAuthority
show snmpSyntax
Example:
MEZ75 (admin) #> show snmp
SNMP Configuration
------------------
Read Community public
Trap Community private
System Location
System Contact
Authentication traps Disabled
System OID 1.3.6.1.4.1.3873.1.20
System Description HP StorageWorks MEZ75
Show stats
Displays the module statistics: FC and iSCSI.
NoneAuthority
show statsSyntax
Example:
MEZ75 (admin) #> show stats
FC Port Statistics
--------------------
FC Port FC1
Interrupt Count 101689711
Target Command Count 0
Initiator Command Count 125680315
Link Failure Count 0
Loss of Sync Count 0
Loss of Signal Count 0
Primitive Sequence Error Count 0
Invalid Transmission Word Count 35
Invalid CRC Error Count 0
FC Port FC2
Interrupt Count 122918453
Target Command Count 0
Initiator Command Count 124846653
Link Failure Count 0
Loss of Sync Count 0
Loss of Signal Count 0
Primitive Sequence Error Count 0
Invalid Transmission Word Count 9
Invalid CRC Error Count 0
Commands 241

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers