HP EVA P6000 User Manual

Front status and UID module
The front status and UID module includes status LEDs and a unit identification (UID) button.
Front UID module LEDs
DescriptionLED statusLED colorLED iconLED
No powerOffGreen1. Health
Enclosure is starting up and not
ready, performing POST
Blinking
Normal, power is onSolid
Normal, no fault conditionsOffAmber2. Fault
A fault of lesser importance was
detected in the enclosure chassis
or modules
Blinking
A fault of greater importance was
detected in the enclosure chassis
or modules
Solid
Not being identified or power is
off
OffBlue3. UID
Unit is being identified from the
management utility
Blinking
Unit is being identified from the
UID button being pushed
Solid
16 P6300/P6500 EVA hardware

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers