HP EVA P6000 User Manual

FRU
Saves and restores the module’s configuration.
Admin session to restoreAuthority
restore
save
FRUSyntax
The fru restore command requires that you first FTP the tar
file containing the configuration to the module. When you issue
restoreKeywords
this command, the system prompts you to enter the restore level.
You can fully restore the module’s configuration (all configuration
parameters and LUN mappings) or restore only the LUN mappings.
The restored configuration does not take effect until the module is
rebooted.
Creates a tar file containing the module’s persistent data,
configuration, and LUN mappings. The file is stored in the module’s
/var/ftp directory. You must then FTP the tar file from the module.
save
Example1: The following is an example of the fru restore command:
MEZ50 <1>(admin) #> fru restore
A list of attributes with formatting and current values will
follow. Enter a new value or simply press the ENTER key to accept
the current value. If you wish to terminate this process before
reaching the end of the list press 'q' or 'Q' and the ENTER key to
do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
Please reboot the system for configuration to take affect.
Example 2: The following is an example of the fru save command:
MEZ50 <1>(admin) #> fru save
FRU save completed. Configuration File is HP_StorageWorks_MEZnn_FRU.bin
Please use FTP to extract the file out from the System.
Help
Displays a list of the commands and their syntax using the basic help command for iSCSI and
iSCSI/FCoE modules:
MEZ50 <1>#> help
iSCSI/FCoE module CLI command qualifieriSCSI module CLI command qualifierCLI command
[ begin | end | start | stop |
cancel ]
[ begin | end | start | stop |
cancel ]
admin
[ on | off ][ on | off ]
beacon
<MMDDhhmmCCYY><MMDDhhmmCCYY>
date
[ logs | stats ][ logs | stats ]
clear
exit
[ restore | save ][ restore | save ]
fru
help
history
[ cleanup | list | unpack ]
image cleanup
[ cleanup | list | unpack ]
image cleanup
image
202 Command reference

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers