HP EVA P6000 User Manual

Table 31 iSCSI or iSCSI/FCoE module log messages (continued)
FC controller reported a fatal error while processing
an Execute IOCB command.
ErrorFC#%d: QLVerifyMenloFw:
EXECUTE_COMMAND_IOCB fatal
error
108050
FC controller reported failure status for a Get
Firmware State command.
ErrorFC#%d: QLGetFwState: Get
Firmware State failed 0-3
%x %x %x %x
108064
Request to reset the FC processor (adapter) received
from IOCTL interface.
InfoFC#%d: QLIoctlDisable: Reset
adapter
118882
FC loop initialization process (LIP) occurred. The LIP
type is reported, as is the contents of the FC
processor’s mailbox 1 register.
InfoFC#%d: QLIsrEventHandler: LIP
occurred (%x): mailbox1 =
%x
119088
FC LIP reset occurred. The LIP reset type is reported,
as is the contents of the FC processor’s mailbox 1
register.
InfoFC#%d: QLIsrEventHandler: LIP
reset occurred (%x):
mailbox1 = %x
119089
FC link up occurred. Event status is reported, as is
the contents of the FC processor’s mailbox 1
register.
InfoFC#%d: QLIsrEventHandler: Link
up (%x) mailbox1 = %x
119090
FC link up occurred. Event status is reported, as is
the RunTimeMode (0 = loop, 1 = point-to-point).
InfoFC#%d: QLIsrEventHandler: Link
mode up (%x): RunTimeMode=%x
119092
An RSCN was received. Event status is reported,
as is the RSCN information.
InfoFC#%d: QLIsrEventHandler: RSCN
update (%x) rscnInfo: %x
119093
FC port update. Event status is reported, as is the
contents of the FC processor’s mailbox 1, 2, and 3
registers.
InfoFC#%d: QLIsrEventHandler: Port
update (%x) mb1-3 %x %x %x
119097
RPC (remote procedure call) server initialization
entry point.
ErrorUserQBRPC_Initialize: Entered139265
Get System API memory allocation failed.ErrorUserQBRPC_Initialize:GetBridge
Mem Allocation error
139266
Get System Advanced API memory allocation failed.ErrorUserQBRPC_Initialize:GetBridgeAdv
Mem Allocation error
139267
Get Management API memory allocation failed.ErrorUserQBRPC_Initialize:GetMgmt Mem
Allocation error
139268
Get iSCSI API memory allocation failed.ErrorUserQBRPC_Initialize:GetIscsi
Mem Allocation error
139269
Get iSCSI advanced API memory allocation failed.ErrorUserQBRPC_Initialize:GetIscsiAdv
Mem Allocation error
139270
Get iSNS API memory allocation failed.ErrorUserQBRPC_Initialize:GetIsns Mem
Allocation error
139271
Get FC Interface API memory allocation failed.ErrorUserQBRPC_Initialize:GetFcIntfc
Mem Allocation error
139272
Get FC Advanced API memory allocation failed.ErrorUserQBRPC_Initialize:GetFcAdv
Mem Allocation error
139273
Failed memory allocation for Get FC SFP API.ErrorUserQBRPC_Initialize:GetFcSfp
Mem Allocation error
139280
Failed memory allocation for Get Log API.ErrorUserQBRPC_Initialize:GetLog Mem
Allocation error
139281
Failed memory allocation for Get Statistics API.ErrorUserQBRPC_Initialize:GetStats
Mem Allocation error
139282
276 iSCSI and iSCSI/FCoE module log messages

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers