HP EVA P6000 User Manual

qsrIsInitStatus
Integer:
1 = unknown,
Syntax
2 = loggedIn,
3 = loggedOut,
4 = recovery
Read-onlyAccess
Status of the iSCSI initiator, that is, whether or not it is logged in to the module.Description
qsrIsInitOsType
SnmpAdminString
Syntax
Read-onlyAccess
The type of the iSCSI initiator's operating system.Description
qsrIsInitChapEnabled
Integer: 0 = enabled; 2 = disabledSyntax
Read-onlyAccess
A value indicating whether CHAP is enabled or not for this iSCSI initiator.Description
LUN table
These tables contain information about the logical unit number (LUN) list.
qsrLunTable
SEQUENCE OF QsrLunEntry
Syntax
Not accessibleAccess
A list of the LUNs on the FC targets discovered by the module. There are as
many entries in this table as there are FC targets on the module.
Description
qsrLunEntry
QsrLunEntry
Syntax
Not accessibleAccess
Each entry (row) contains information about a specific LUN. This table extends
scsiDscLunTable in QLOGIC-SCSI-MIB. The entries in this table show
other attributes of the LUN.
Description
The QsrLunEntry contains of following sequences of objects.
PhysAddressqsrLunWwuln
SnmpAdminStringqsrLunVendorId
SnmpAdminStringqsrLunProductId
SnmpAdminStringqsrLunProdRevLevel
Unsigned32qsrLunSize
INTEGERqsrLunState
Management Information Base 257

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers