HP EVA P6000 User Manual

qsrIsInitEntry
QsrIsInitEntry
Syntax
Not accessibleAccess
Each entry (row) contains information about a specific iSCSI initiator.Description
An iSCSI initiator information entry consists of the following sequence of the object:
Unsigned32qsrIsInitIndex
SnmpAdminStringqsrIsInitName
SnmpAdminStringqsrIsInitAlias
InetAddressTypeqsrIsInitAddressType
InetAddressqsrIsInitAddress
INTEGERqsrIsInitStatus
SnmpAdminStringqsrIsInitOsType
INTEGERqsrIsInitChapEnabled
qsrIsInitIndex
Unsigned32
Syntax
Not accessibleAccess
An arbitrary positive integer denoting each iSCSI initiator discovered by the
module.
Description
qsrIsInitName OBJECT-TYPE
SnmpAdminString
Syntax
Not accessibleAccess
iSCSI name of the initiator.Description
qsrIsInitAlias OBJECT-TYPE
SnmpAdminString
Syntax
Read-onlyAccess
Alias for the iSCSI initiator.Description
qsrIsInitAddressType
InetAddressType
Syntax
Read-onlyAccess
Type of iSCSI initiator’s IP address (IPv4 or IPv6).Description
qsrIsInitAddress
InetAddress
Syntax
Read-onlyAccess
IP address of the iSCSI initiator.Description
256 Simple Network Management Protocol

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers