HP EVA P6000 User Manual

Show CHAP
Displays CHAP configuration for iSCSI nodes.
NoneAuthority
show chapSyntax
Example:
MEZ50 <1>(admin) #> show chap
The following is a list of iSCSI nodes that have been configured
with CHAP 'ENABLED':
Type iSCSI Node
-------- ------------
Init iqn.1991-05.com.microsoft:server1
Show FC
Displays FC port information for the specified port. If you do not specify a port, this command
displays all ports.
NoneAuthority
[port_num]show fcSyntax
Identifies the FC or FCoE port to display.[port_num]Keywords
Example 1:
MEZ75 (admin) #> show fc
FC Port Information
---------------------
FC Port FC1
Port Status Enabled
Port Mode FCP
Link Status Up
Current Link Rate 4Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:00:00:75 (VPGROUP_1)
WWPN 21:00:00:c0:dd:00:00:75 (VPGROUP_1)
Port ID 00-00-ef (VPGROUP_1)
WWNN 20:01:00:c0:dd:00:00:75 (VPGROUP_2)
WWPN 21:01:00:c0:dd:00:00:75 (VPGROUP_2)
Port ID 00-00-e8 (VPGROUP_2)
WWNN 20:02:00:c0:dd:00:00:75 (VPGROUP_3)
WWPN 21:02:00:c0:dd:00:00:75 (VPGROUP_3)
Port ID 00-00-e4 (VPGROUP_3)
WWNN 20:03:00:c0:dd:00:00:75 (VPGROUP_4)
WWPN 21:03:00:c0:dd:00:00:75 (VPGROUP_4)
Port ID 00-00-e2 (VPGROUP_4)
Firmware Revision No. 5.01.03
Frame Size 2048
Execution Throttle 256
Connection Mode Loop
FC Port FC2
Port Status Enabled
Port Mode FCP
Link Status Up
Current Link Rate 4Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:00:00:76 (VPGROUP_1)
WWPN 21:00:00:c0:dd:00:00:76 (VPGROUP_1)
224 Command reference

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers