Management Information Base
This section describes the QLogic management information base (MIB).
Network port table
The network port table contains a list of network ports that are operational on the module. The
entries in this table include the management port (labeled MGMT), and the Gigabit Ethernet ports
(labeled GE1 and GE2).
qsrNwPortTable
SEQUENCE OF QsrNwPortEntrySyntax
Not accessibleAccess
Entries in this table include the management port, and the iSCSI ports on the module.Description
qsrNwPortEntry
QsrNwPortEntrySyntax
Not accessibleAccess
Each entry (row) contains information about a specific network port.Description
A network port entry consists of the following sequence of objects:
QsrPortRoleqsrNwPortRole
unsigned32qsrNwPortIndex
INTEGERqsrNwPortAddressMode
InetAddressTypeqsrIPAddressType
InetAddressqsrIPAddress
InetAddressqsrNetMask
InetAddressqsrGateway
MacAddressqsrMacAddress
QsrLinkStatusqsrNwLinkStatus
QsrLinkRateqsrNwLinkRate
qsrNwPortRole
QsrPortRoleSyntax
Not accessibleAccess
Operational role of this port: management port or iSCSI port.Description
qsrNwPortIndex
Unsigned32Syntax
Not accessibleAccess
A positive integer indexing each network port in a given role.Description
252 Simple Network Management Protocol